Steam generator operating peacefully on the sidewalk
Liner being hoisted to the roof
Steam is introduced into the liner at the bottom in the boiler room
14 “ProForm™ Liner being dropped down 95′ Chimney
After about 2 hours of curing, the liner will be trimmed to the necessary height.
This job originally called for a stainless steel liner. Even after several breaches were made in the chimney, it was determined that stainless would have been close to impossible. Proform™ was used instead to save the day.
ProForm™ liner before inflation
ProForm™ liner inflating halfway down the chimney. Normally you would not have this view since there is no need to create additional breaches in a ProForm™ Chimney Restoration installation.
